Custom quotes from a real representative

450 652-7767

Warehouse floor plan

Draw your warehouse. Get the layout and the parts list.

Enter the inside dimensions, columns, dock doors and offices. The planner lays out selective pallet racking, counts the pallet positions and lists the parts from our catalogue, with an estimated total.

Indicative plan: the final layout, capacities and compliance (sprinklers, CNESST, manufacturer) are validated by AREIC and, when needed, an engineer.

Dock stagingOfficeAisle 12 ft120 ft200 ftN

Drag to move the plan once zoomed in; mouse wheel or buttons to zoom.

120 × 200 ft: 18 rack rows, 207 bays, ≈ 2,070 pallet positions.

  • Racking
  • Aisles
  • Dock staging
  • Office
  • No rack
  • Walkway
  • Tunnel
  • Column
  • Dock door
  • Emergency door
1. Building

Under the lowest obstruction: joists, sprinklers, lights.

Existing plan (optional)

Upload a PNG, JPG or PDF plan (10 MB max.) to trace over it. It stays in your browser: nothing is sent.

2. Obstacles
Dock doors

Distance from the north-west corner, along the wall.

Door 1

Door 2

Door 3

Clear floor in front of the doors for receiving and shipping.

Offices, no-rack zones and walkways

X and Y: distance from the north-west corner to the zone’s corner.

Office 1

3. Forklift and pallets

to confirm with AREIC

to confirm with AREIC

Face width × depth into the rack.

Passed on to AREIC, who validates the parts’ capacity.

Row orientation

Advanced assumptions

to confirm with AREIC

Result

96 in bays (2 pallets) · 42 in frames · 60 in per level · north–south rows

Pallet positions

≈ 2,070

estimate

Bays

207

estimate

Levels

5

estimate

under the clear height minus the clearance

Floor utilisation

28.7 %

estimate

Frames (uprights)

225

estimate

Beam pairs

828

estimate

Safety bars

3,312

estimate

Bays with anti-fall panels

17

estimate

Protectors

62

estimate

Row spacers

96

estimate

Rows

18

estimate

Parts list (AREIC catalogue)

Working out the parts list…

    Some parts are on request: firm price by quote

    Material only, before installation, delivery and taxes

    estimate

    —

    Next steps

    The plan is kept in the link and in this browser.

    Assumptions
    • Building: 120 × 200 ft (24,000 sq ft), 30 ft clear height
    • Sprinkler clearance: 36 in; wall gap: 8 in
    • Forklift: Counterbalance forklift; 12 ft aisles; 20 ft max lift (to confirm with AREIC)
    • 40 × 48 in pallets, 2,000 lb, 48 in load height
    • 96 in bays (2 pallets), 42 in frames, 60 in per level, the floor counts as a level
    • Without wire decks: 2 safety bars per pallet position
    • Back-to-back double rows (8 in spacers between the frames) and single rows along the walls; a cross-aisle at both ends
    • Rows along the walls may start against the end wall (8 in), with no guard or taller upright on that end
    • Single row in the middle, reachable from both sides (17 bays): anti-fall mesh panels on its back, 4 in off the uprights, from the first level to the top, and full-height uprights (panels to confirm with AREIC, not in the total)
    • columns every 40 × 40 ft (12 in); 3 dock doors, 40 ft dock staging; 1 excluded zone
    • Protectors: an end-of-aisle guard (required) at each row end and a protector (recommended) on the aisle-side upright of each end frame; 2 spacers per frame pair
    • Capacity certification (warehouse layout and engineer’s stamp) required: cost depends on the project, confirmed by AREIC