Glossary
The words of pallet racking and warehouse equipment, explained simply. The French term is shown for each one.
- Aisle
- The space between rows where forklifts travel. Its width depends on the type of forklift.
- In French: Allée
- Anchor
- The bolt that fastens the frame's foot plate to the concrete floor.
- In French: Ancrage
- Bay
- The space between two upright frames, over the full height of the rack.
- In French: Baie
- Beam
- The horizontal member hooked onto the frames, on which pallets sit. Beams go in pairs, front and back.
- In French: Poutre
- Beam face
- The height of the beam profile. Together with the length, it sets the capacity of the beam pair.
- In French: Hauteur de poutre
- Cantilever rack
- Arm racking with no front posts, for long loads such as pipe, lumber or bar stock.
- In French: Palettier en porte-à-faux (cantilever)
- Column protector
- A guard installed at the base of a frame to protect it from forklift impacts.
- In French: Protecteur de montant
- Dock plate
- A plate that bridges the gap between the dock and the truck for light handling. It isn't made for forklifts.
- In French: Plaque d'accès
- Dockboard
- A curbed board that bridges the gap between the dock and the truck, with steel legs that keep it from moving.
- In French: Rampe de chargement
- Double row
- Two rows of racking placed back to back and tied with row spacers. A single row is reached from one side only.
- In French: Rangée double
- Frame depth
- The distance from the front to the back of the upright. It is chosen from the pallet depth: 42 in (outside measure) for a 48 in deep pallet.
- In French: Profondeur de montant
- Level
- The height at which a pair of beams sits in a bay. The floor can also be used as a level.
- In French: Niveau
- Pallet jack
- A manual or powered unit that lifts a pallet slightly to move it along the floor.
- In French: Transpalette
- Pallet position
- A spot that holds one pallet. A two-pallet bay with four levels has eight positions.
- In French: Position de palette
- Pallet rack
- A storage structure made of upright frames and beams that holds loads on pallets. Also called pallet racking.
- In French: Palettier
- Rolling ladder
- A mobile stairway with a platform, on casters, to reach high shelves.
- In French: Échelle roulante
- Row spacer
- A part that ties two back-to-back pallet rack rows together. The standard is 8 in; 12 in is common when a building column stands between the two rows.
- In French: Espaceur de rangée
- Selective rack
- Racking in which every pallet can be reached directly from the aisle.
- In French: Palettier sélectif
- Upright frame
- The vertical frame of a rack: two posts joined by braces. Two frames form the sides of a bay.
- In French: Montant
- Wire deck
- A wire panel laid on the beams to support loads or keep items from falling through.
- In French: Grillage